4in1 Mug Heat Press Sublimation Machine for 10oz 11oz 12oz 17oz Mug
Mug heat press machine can sublimate colorful pictures onto the Sublimation coated mug/bottle/glass mug etc. This machine is widely used into the different mugs like 11oz or 10oz, you can put your favorite picture and photo onto the mugs,own yourself unique handicrafts,it will be your best choice
Features:
1. Solid steel framework & stainless steel hardwares
2. Fully digital temperature & Time control
3. Automatic Alarm,Temperature & Time recycle
4. Silicone heater, speed & even heater technology
5. Heat & pressure averaged, enable for high demand heat press
| Item No |
XY-012G(4in1) |
| Specified voltage |
110V/220V |
| Power |
350w |
| Temperature range |
0-200*c |
| Time range |
0-999sec |
| Dimension |
68x29x48cm |
| Net weight |
6kg |
| Gross weight |
7kg |
Operation of the Instrument:
1. Plug the power cable into the mug heat pres and switch the power on.
2. Setting time,temperature. Press"set". Display shows "sh"to set temperature. Usually to 180*c"set" again, show"st" to set time, usually 160-180seconds.
3. Waiting for the heat plate to get to the set temperature (heating to 180*c needs about 3-5 minutes to heatup)
4. when the mug heat press is at the set temperature insert your mug with your design taped onto the mug( use heat tape )and close the handle. Soon as the handle is closed press the timer switch on the side and soon as it beeps open the handle and take out your mug
5. Wait for the mug to cool down before peeling of the transfer paper. And your mug is complete
Please Note:
1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
rature
Company introduction:
Hefei Gere-tech International Co.Ltd.Is a firm with 10+ years of histroy.We devote ourselves in R&D on signage and Sublimation industries.Our Refine brand cutting plotters and heat press are very popular in North America,Europe, Latin America, Asia and Africa.
We alway provide quality products, reasonable prices as well as best possible after-service!We offer quality guarantee.Our service time is weekly 7days x 15hours/day .
We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors!
We promise!We guarantee!
"Gere-tech" is your correct and long-term buiness partner!
Please note : successful print requires right time,temperature and pressure,the thickness of the clothes material,even the type of printing paper,all will affect the performance of printing.Any kind of sublimation paper need test before mass production.
Audited Supplier 
){kind=link}
){kind=link}