15*15cm Up-Slided Pneumatic Double Station Logo Heat Press Automatic Transfer Machine
A LOGO heat press machine is the machine that presses a transfer onto an imprintable substrate . Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the product. Heat presses are recommended for professional and satisfying results simply because standard laminating devices and home hand irons can not get even near the temperatures required for a reliable transfer.
| Voltage |
110/220V |
| Power |
600W |
| Temperature range |
0-220ºC |
| Time control range |
0-399s |
| Temperature error band |
+/-5 degrees |
| Printing Size |
15*15cm |
| Package Size |
50*62*49cm |
| Weight |
35KG |
Please Note
1.This machine must be protected by safe and reliable ground wire.
2. During heating up and operation, please do not touch the heater to avoid scalding.
3. To get successful sublimation effect, it should be correct time, temperature and pressure; the thickness and material of the heating sublimation products and the ink and paper also will affect the sublimation effect.
4. Before large scale production, you must make some sample test to make sure the best time, temperature, pressure etc.
5. The temperature controller is complicated, except the temperature setting, please do not make other setting to avoid program error and broken.
6. Don't put your hand on the working plate when the machine is working, for prevent your hand from burns
COMMON FAILURES and THEIR POSSIBLE REASONS
1. cylinder: when the heating board can not lift up or press down, check the pressure valve whether it has pressure or not.
2. heater can not be heating up: the panel has problem or the relay is not working or heater is broken.
3. thermocouple is broken: one line broken light will light up from the temperature display, then change the thermal couple.
4. picture burning: Too much time or temperature, just adjust time or temperature
5. picture not vivid: less time or too low temperature, just adjust to have more time or temperature
Payment:
1) We accept T/T, Western Union, L/C(depending on order amount).
2) Sight L/C is acceptable if order amount exceeds usd20,000.00.
Company introduction:
Hefei Gere-tech International Co.Ltd.Is a firm with 10+ years of histroy.We devote ourselves in R&D on signage and Sublimation industries.Our Refine brand cutting plotters and heat press are very popular in North America,Europe, Latin America, Asia and Africa.
We alway provide quality products, reasonable prices as well as best possible after-service!We offer quality guarantee.Our service time is weekly 7days x 15hours/day .
We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors!
We promise!We guarantee!
Audited Supplier 
){kind=link}