5in1 Combo Heat Press for T-Shirt Mug Plate Hat Heat Transfer Machine
5 in 1 Heat Press Machine = 1x T-shirt press + 1x mug press + 2x plate press machine + 1x cup press.
This 5-in-1 heat press machine can transfer colorful pictures and characters (via sublimation ink/pigment ink and sublimation paper/heat transfer paper) onto ceramics, glasses and textiles (such as polyester, cotton, flax, chemical fiber etc.). It can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges, coasters, floor mats and just about every other in flat surface.
| Item No |
XY-008(5in1) |
| Work Size |
29*38/38*38cm |
| Voltage |
110/220V |
| Power |
900W |
| Temperature |
0-220°C |
| Time for heating up |
10-15 minutes |
| Packing Size |
50.5*47*42/59*47*48cm |
| Gross Weight |
20.5/29.3KG |
Read before operating
1. Be sure to operate with a safe ground wire! Check the voltage before using this machine.
2. After finishing your work, please turn the machine off.
3. Don't touch the heater when the machine is on or when its temperature is still high after turning it off.
4. Keep out of the reach of children.
Please Note
1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
Suggested Time and Temperature
| Materials |
Time (Seconds) |
Temperature ( C Degree) |
| Color cap (polyester) |
30-35 |
180-190 |
| Cap (cotton & polyester) |
25-30 |
180-190 |
| Ceramic mug |
170-190 |
180-190 |
| Aluminum bottle |
25-30 |
170-175 |
| Stainless bottle |
30-35 |
170-175 |
| Glass mug |
150-180 |
180 |
| Pure cotton (light color) |
15-25 |
165-185 |
| Pure cotton (dark color) |
25-30 |
165-185 |
| Polyester |
25-30 |
180-190 |
| Aluminum board |
20-25 |
180-190 |
| Mouse pad |
30 |
190 |
| Paper puzzle |
30-40 |
180-190 |
NOTE: The data above is for reference only, the exact time and temperature
would depend on the material you use and your intended goals.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
Payment:
1) We accept T/T, Western Union, L/C(depending on order amount).
2) Sight L/C is acceptable if order amount exceeds usd20,000.00.
Company introduction:
Hefei Gere-tech International Co.Ltd.Is a firm with 10+ years of histroy.We devote ourselves in R&D on signage and Sublimation industries.Our Refine brand cutting plotters and heat press are very popular in North America,Europe, Latin America, Asia and Africa.
We alway provide quality products, reasonable prices as well as best possible after-service!We offer quality guarantee.Our service time is weekly 7days x 15hours/day .
We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors!
We promise!We guarantee!
Audited Supplier 
){kind=link}
){kind=link}