Hat Heat Press Machine Baseball Hat Cap Printing High Pressure Transfer Machine
This machine can thermo-transfer (via sublimation) colorful pictures and words onto cap or similar curved products made of polyester, cotton, flax, chemical fiber, nylon, etc.
| Voltage |
110V/220V |
| Power |
500W |
| Temperature range |
0-399ºC |
| Time control range |
0-999 Sec |
| Temperature error band |
+/-5 degrees |
| Heater size |
15*8cm |
| Gross Weight |
15.7kg |
Read before operating
- Be sure to operate with a safe ground wire! Check the voltage before using this machine.
- After finishing your work, please turn the machine off.
- Don't touch the heater when the machine is on or when its temperature is still high after turning it off.
- Keep out of the reach of children.
Suggested Time and Temperature
| Materials |
Time (Seconds) |
Temperature (Celsius Degree) |
| Color cap (polyester) |
30-35 |
180-190 |
| Cap (cotton & polyester) |
25-30 |
180-190 |
Note: The information and parameters given above are for reference only, specific parameters might vary depending on the materials you use and the outcome you try to achieve.
Please Note
- Be careful of the hot heating surface!!
- Please make sure the heating temperature and transfer time are correct
- In order to extend the service life of this machine, please turn the machine off for 15 minutes after using it continuously for 4 hours.
- You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
- Each time you put through power supply and turn power switch on, the heater will take some time (about 20 minutes) to warm up to reach the target temperature for the first press.
- When changing the heating element, please remember to turn off the power and take off the power plug first, or it will burn the heating elements.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
Shipment:
1) TNT/DHL/UPS for samples, Door-to-Door shipping service.
2) For batch machines, shipment is effected by Seaway ( FCL or LCL).
3) We are able to arrange shipping . It's also acceptable if buyers nominate their own
shipping agent.
4) Delivery Time:3 -7 days for samples;10-20 days for batch goods.
Payment:
1) We accept T/T, Western Union, L/C(depending on order amount).
2) Sight L/C is acceptable if order amount exceeds usd20,000.00.
Company introduction:
Hefei Gere-tech International Co. Ltd. Is a firm with 10+ years of history . We devote ourselves in R&D on signage and Sublimation industries . Our Refine brand cutting plotters and heat press are very popular in North America, Europe, Latin America, Asia and Africa. We always provide quality products, reasonable prices as well as best possible after-service ! We offer quality guarantee. Our service time is weekly 7days x 15hours/day . We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors! We promise! We guarantee!
Audited Supplier 
){kind=link}