Swinger Heat Press Machine 23X29cm T Shirt Transfer Printing Heat Press Machine
Product Details
| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support |
| Warranty: | 1 Yeay |
Gold Member Since 2015
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Address
Room 1302, Wangcheng Building, No. 140 Guanting Road, Shushan District, Hefei, Anhui, ...
International Commercial Terms(Incoterms)
FOB, EXW, CFR, CIF, CIP, CPT, FCA
Terms of Payment
LC, T/T, Western Union, Money Gram
Find Similar Products
Basic Info.
- Model NO.
- XY-009
- Plate Type
- Transfer Print
- Color & Page
- Multi-Colour
- Automatic Grade
- Semi-Automatic
- Printing Speed
- 10min
- Type
- Pin-on
- Plate
- Lithography Printing
- Structure
- Platen Press
- Species
- Continuous
- Size
- 23X29cm
- Function
- to Transfer DIY Photos on T-Shirts
- Name
- Swing Away Heat Press
- Usage
- Cloths Printer, Label Printer, Sublimation Heat Pr
- Driven Type
- Manual
- Transport Package
- Export Standar Cartons
- Specification
- CE
- Trademark
- Refine
- Origin
- China(Mainland)
- HS Code
- 84513000
- Production Capacity
- 2500unis/Month
Product Description
Swinger Heat Press Machine 23X29cm T shirt Transfer Printing Heat Press Machine
A heat press machine is the machine that presses a transfer onto an printable substrate . Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the product .Heat presses are recommended for professional and satisfying results simply because standard laminating devices and home hand irons can't get even near the temperatures required for a reliable transfer.
Please Note:
1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
Payment:
| Work Size | 23*29cm |
| Voltage | 110/220V |
| Power | 650W |
| Temperature | 0-220°C |
| Time for heating up | 10-15 minutes |
| Packing Size | 44.5*38.5*35cm |
| Gross Weight | 14.7KG |
Please Note:
1. Be careful of the hot heating surface
2. Please make sure the heating temperature and transfer time are correct
3. In order to extend the service life of this machine, please turn the machine off for 15 minutes after 4. using it continuously for 4 hours.
5. You may refer to "Suggested Time and Temperature" chart to determine the suitable temperature and time according to the material.
6. Each time you put through power supply and turn power switch on, the heater will take some time to warm up to reach the target temperature for the first press.
COMMON PRINTING FAILURES and THEIR POSSIBLE REASONS
1. The color is lighter: the temperature is too low; OR the pressure is not even; OR the time is too short.
2. The design is indistinct: the time is too long which led to ink diffusion.
3. The design has no luster: the pressure is too high; OR the temperature is too high.
4. Part of design is indistinct: heat printing zone OR the heating is not even.
5. Scar on design: heat printing time is too long.
6. Depth of color is not the same: pressure not even OR the coating is not even.
7. Paper stick to the object: the temperature is too high; OR the coating of the object is not good.
8. Please do not set the temperature to more than 250°C or it will shorten the service life of the machine.
1) We accept T/T, Western Union, L/C(depending on order amount).
2) Sight L/C is acceptable if order amount exceeds usd20,000.00.
Company introduction:
Hefei Gere-tech International Co.Ltd.Is a firm with 10+ years of histroy.We devote ourselves in R&D on signage and Sublimation industries.Our Refine brand cutting plotters and heat press are very popular in North America,Europe, Latin America, Asia and Africa.
We alway provide quality products, reasonable prices as well as best possible after-service!We offer quality guarantee.Our service time is weekly 7days x 15hours/day .
We have superior and steady sales + service staff, which is our biggest advantage among most Chinese competitors!
We promise!We guarantee!
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Product Groups
More
Find Similar Products By Category
- Supplier Homepage
- Products
- Heat Press Machine
- High Pressure Press
- Swinger Heat Press Machine 23X29cm T Shirt Transfer Printing Heat Press Machine
Related Categories
Hot Searches
More