High Pressure Heat Transfer Press Machine T-Shirt Printing Heat Press Machine

Product Description

High Pressure Heat Transfer Press Machine T-shirt Printing Heat Press Machine

 
Read before operating :
1. Be sure to operate with a safe ground wire! Check the voltage before using this machine. 
2. After finishing your work, please turn the machine off.
3. Don't touch the heater when the machine is on or when its temperature is still high after turning it off.
4. Keep out of the reach of children.

Operation:

1. Set the Pressure

You can use the pressure knob to adjust the pressure, turning it clockwise will increase the pressure. Please pull the handle up and press it down to see whether the pressure is suitable (before starting the intended operations).
2. Setting the Time & Temperature
OUT : Heating indicator light
TM : Countdown Time Indicator light
1) Set temperature: Press TEMP "SET" button, panel shows " SP", press up and down button to set the temperature
2) Save setting: Press TEMP "SET" button for 3 seconds to save the temperature
3) Set Time: after setting temperature, press TIME "SET" button again ,panel shows "SL", press up and down button to set the time.
4) Save setting: Press TIME "SET" button for 3 seconds to save the time. Machine starts to heat up automatically.
5) Remark for other setting: (PS :These data must be operated only by technicians.)

1. Press button "SET" until the display shows "LOY"
2. Press button "up and down" to enter password "88"
3. Press button "SET" till the display shows "CF", then press button "up and down" to transfer Degrees Celsius and Fahrenheit
4. When the display shows "0", it is Celsius
5. When the display shows "1", it is Fahrenheit(if it is Fahrenheit, the temperature is different from Celsius, and the conversion formula is: ºF=1.8*ºC+32)
6. Press button "SET" about 5s to confirm and log out the setting

3. Preparing the Sublimation Paper
Print the designed image on the sublimation paper with the sublimation ink. Remember to choose mirror image(except dark color cotton used heat transfer paper). Do not use the sublimation paper until the ink is dry.

4. Preparing the sublimation blank
Prepare the t shirt, place it on the t shirt heater (t shirt should lie on the board flat and even).

5. Begin sublimation printing
When reach to the target temperature, place the sublimation paper with the t shirt. Press the heater down to start printing.

6. Finish
When the timer countdowns to zero and the buzzer rings, please raise the handle up to open the heater, and then take out the t shirt and paper carefully.
Move the sublimation paper and you will see the designed image is well pressed on the t shirt.